Activating / Deactivating The Schedule Alarm (Ta); Switching Off The Alarm Signal; Displaying The Temperature In °C / °F; Moon Phase - Auriol 283736 Operation And Safety Notes

2. Press and keep pressed the ALARM SET button
for approx. 3 seconds. The year display will
flash.
3. Press the UP or DOWN button
25
the desired value.
4. Press the ALARM SET button to confirm your
setting. The month display flashes.
5. Repeat the above step 3 and 4 to set the
values for month, date, hour and minute.
Activating / Deactivating the
Schedule Alarm (TA)
1. Press the ALARM SET button
"TA" will be displayed in the display.
2. Press the ALARM ON / OFF button
The Schedule alarm symbol
played to indicate that the Schedule alarm is
activated.
3. Press the ALARM ON / OFF button again
causes the Schedule alarm symbol
cease to be displayed. The schedule alarm is
deactivated.

Switching off the alarm signal

Press any button except the SNOOZE button
to stop the alarm signal sounding. You do not
have to reactivate the alarm. It reactivates itself
automatically according to the weekly rhythm.
Note: The alarm signal switches itself off after
2 minutes.
Displaying the temperature
in °C / °F
The current indoor air temperature
on the LCD.
Press the °C / °F button
the Celsius and Fahrenheit temperature scales.
10 GB
to set
24
three times.
27
once.
29
will be dis-
1
to
18
is indicated
7
to switch between
20

Moon phase

The product shows the current moon phase
the LC display.
It uses the following symbols:
Full moon Waning
gibbous
New moon Waxing
crescent

Displaying summertime

Summertime is automatically indicated on the LCD by
the summertime icon
the information as to whether it is summertime or
not from the DCF radio signal.
Note: Reception of the radio signal may be seriously
disrupted in reinforced concrete buildings.

Setting the timer

Press and hold the °C / °F button
prox. 3 seconds. The Timer symbol
will be displayed.
Press UP button
25
hours and DOWN button
values for minutes.
Hint: If you press and hold down the UP or
DOWN, you accelerate the process and reach
the desired value more quickly.
Press the WAVE button
The timer now begins counting down and the
Timer symbol
You can press the WAVE button again
anytime to stop the timer from counting down.
in
8
Last quarter Waning
crescent
First quarter Waxing
gibbous
. The product receives
6
for ap-
20
to change the values for
to change the
24
to start the timer.
19
is flashing.
2
2