Troubleshooting; Disposal; Declaration Of Conformity - tepro TORONTO Instruction Manual

and corrosion nor entirely maintenance-free. Even the highest
quality stainless steel requires regular cleaning with clean water
to prevent oxidation and corrosion.
Modern style demands that your grill is outfitted with stainless
steel components and a brushed finish. This brushed finish is
achieved by a process that removes the mirror-like lustre of
stainless steel.
Stainless steel products with a brushed finish demand regular
cleaning and care to maintain their appearance. Without appro-
priate care, your stainless steel product will be subject to rust
and corrosion.
Stainless steel is not a maintenance-free material. Cleanli-
ness and stainless steel go hand in hand.
After assembling your grill, we recommend applying a thin
layer of olive oil to all readily accessible stainless steel sur-
faces with a clean cloth.
With another clean cloth, buff the olive oil into the surface until
you achieve a non-oily finish. This method of cleaning protects
the material against filth and other aggressive harmful substanc-
es with a temporary, food-safe protective shield.
This film of olive oil also makes later polishing easier as well as
removing fingerprints, etc. Repeat this process from time to time
when you clean your grill.
IMPORTANT INFORMATION
Perhaps you have purchased a protective cover for your grill.
To protect your investment, we recommend using the grill cover
whenever the appliance is not in use. However, put on the pro-
tective cover only once your grill has cooled down and is clean
and dry. It may be necessary to use a protective cover. Caution!
Placing a protective on your grill while it is warm, wet or unclean
may lead to heavy rusting.
For this reason, your grill should be cool, cleaned of surface
filth and thoroughly dried before you put on the cover. This
is especially important before long periods of disuse, i.e. during
winter storage.
Follow these maintenance and care tips carefully in order to pre-
serve the quality of your grill for a long time.
Take good care of your investment and it will be of great service
to you for many years to come.
P180196_TEPRO_3184UK_Toronto_Steakgrill_20181114.indd 9

Troubleshooting

Problem Possible cause
BBQ won't ignite. – LP gas bottle is empty
– Defective regulator
– Blockage in burner
– Blockage in the gas noz-
zles or in the gas hose
– Electrode cable loose or
separated from electrode
or ignition unit
– Electrode or cable
defective
– Defective ignition switch
Small flame or – Blockage in BBQ
insufficient heat
– Blockage in the gas noz-
zles or in the gas hose
– Wind in gas BBQ area is
too strong
BBQ does not – No battery power
ignite
Device switches – LP gas bottle is empty
off during oper-
– Food is in contact with
ation
temperature sensor

Disposal

The packaging is made from environmentally friendly
materials, which you can dispose of at your local recy-
cling points.
Do not under any circumstance dispose of the BBQ in
normal household waste! Dispose of it at an approved
disposal business or at your community disposal facility.
Respect the currently valid regulations. If in doubt, get in
touch with your disposal facility.
Information on (rechargeable) batteries
Please do not throw batteries into household waste.
Every consumer is legally obligated to hand in batteries
at a collection point in his or her community or suburb,
or at the distributor's outlet. From there, the batteries
can be disposed of in an environmentally friendly way.
On batteries containing harmful materials, you'll find the chemi-
cal symbols Cd for cadmium, Hg for mercury, and Pb for lead.
Batteries are labelled with the symbol shown on the left.

Declaration of conformity

This product fulfils the valid European and national directives.
This is confirmed by the CE mark (corresponding declarations
are lodged with the manufacturer).
t
Suggested solution
– Replace with full LP
gas bottle
– Get the regulator tested
or replace it
– Cleaning the BBQ
– Clean the gas nozzles
and gas hose
– Reconnect the cable
– Replace the electrode
or cable
– Replace the ignition
switch
– Clean the BBQ
– Clean the gas nozzles
and gas hose
– Replace the burner
plate
– Position the gas BBQ in
an area protected from
the wind
– Insert new battery
– Replace with full LP
gas bottle
– Ignite the BBQ anew
and place BBQ goods
in more suitable
position
9
14/11/2018 3:06 PM