Satellite Receiver - Sony Grand WEGA KDF-E60A20 Operating Instructions Manual

Satellite Receiver

S VIDEO
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
Disconnect all power sources before making any connections.
1
Connect the satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
2
Use A/V and S VIDEO cables to connect the satellite receiver's AUDIO
and S VIDEO OUT jacks to the TV's AUDIO and S VIDEO IN jacks.
3
Use a coaxial cable to connect your cable to the TV's CABLE jack, or
your antenna to the TV's VHF/UHF jack.
Rear of TV
VIDEO IN
1 3
S VIDEO
VIDEO
L (MONO)
AUDIO
R
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
A/V cable (not supplied)
S VIDEO cable (not supplied)
✍
If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
VHF/UHF CABLE
Connecting the TV
Coaxial cable
Satellite receiver
Satellite
antenna
cable
23