General - Sony Grand WEGA KDF-E60A20 Operating Instructions Manual

General

Problem
How to restore the TV to
factory settings
How to restore Video settings
to factory settings
How to restore Audio settings
to factory settings
Cannot cycle through the other
video equipment connected to
the TV
Cannot operate Menu
Lost password
TIMER is set
Digital cable box does not work
Cannot record digital channels
to VCR
The replacement lamp does not
light up
TV cabinet creaks
Possible Remedies
❏
Turn on the TV. While holding down the V button on the remote control, press the
POWER button on the TV. (The TV will turn iteself off, then back on again.)
Release V button.
WARNING: The Factory Reset will clear all of your customized settings
Parental Lock
including
❏
Select RESET menu option while in the Video menu (see page 58).
❏
Press RESET menu option while in the Audio menu (see page 60).
❏
Be sure the Label Video Inputs
❏
If a menu option appears in gray, this indicates that the menu option is not
available.
❏
In the password screen (see page 66), enter the following master password: 4357.
The master password clears your previous password; it cannot be used to
temporarily unblock channels.
❏
The LED will remain lit even when the TV is turned off. To rest the timer or
cancel the timer, see page 73. If the LED (red) blinks continuously, this may
indicate the TV needs service.
❏
If you are connecting a VCR and digital cable box using a splitter, as described on
page 34, you must use a special bi-directional splitter that is designed to work
with your digital cable box. Contact your cable provider for details.
❏
Only analog channels can be recorded to your VCR.
❏
The screw of the lamp cover may be slanted. Take out the screw, insert it straight
into the screw hole, and then tighten it completely (see page 76 for both
KDF-E55A20 and KDF-E60A20).
❏
When the TV is in use, there is a natural rise in temperature, causing the cabinet to
expand or contract and may be accompanied by a slight creaking noise. This is not
a malfunction.
setting.
option is not set to
Other Information
Skip (see page 70).
83