Cable Box And Antenna - Sony Grand WEGA KDF-E60A20 Operating Instructions Manual

Cable Box and
Antenna
Before connecting a
cable box, see "Using
CableCARD Device" on
page 25.
Notes on Using This Connection
To Do This ...
Use the cable box
Set up the TV remote control to operate the cable
box
Activate the remote control to operate the cable
box
Prevent the accidental switching of TV channels When using the cable box, ensure that the TV remains tuned to the
Switch the TV's input between the cable box and
antenna
For best results, use this connection if:
❑
Your cable company scrambles some channels, such as premium
channels (which requires you to use a cable box), but does not scramble
all channels.
❑
You do not have a VCR. (If you have a VCR, see pages 32 and 33.)
With this connection you can:
❑
Use the TV's remote control to change channels coming through the
cable box to the TV's cable input. (You must first program the remote
control for your specific cable box; see "Programming the Remote
Control" on page 44.)
❑
Use the TV's remote control to change channels coming directly into
the TV's VHF/UHF input jack.
CATV cable
Antenna
cable
Do This ...
Tune the TV to the channel the cable box is set to (usually channel 3
or 4) and then use the cable box to switch channels.
Program the remote control. See "Programming the Remote
Control" on page 44.
Press SAT/CABLE (FUNCTION)
indicator lights up.
channel that the cable box is set to (usually channel 3 or 4).
Press ANT
(scrambled channels) and CABLE (unscrambled) inputs.
IN OUT
Cable box
VHF/UHF
Rear of TV
once, and the
to switch back and forth between the TV's VHF/UHF
Connecting the TV
Coaxial
cable
Cable
SAT/CABLE
21