Sony Grand WEGA KDF-E60A20 Operating Instructions Manual page 65

z
If 4:3 Default is set to
anything but Off, the
Wide Mode setting
changes only for the
current channel. When
you change channels
(or inputs), Wide Mode
is automatically
replaced with the 4:3
Default setting. To
retain the current Wide
Mode setting as
channels and inputs
are changed, set 4:3
Default to Off.
Option Description
4:3 Default Wide Zoom
Select the default
screen mode to
use for 4:3
Normal
sources.
Full
Zoom
Off
Display Area
Select
or –2 to keep the edge of the picture out of screen.
Vertical Center Adjust
Vertical Size Adjust
Select to enlarge the 4:3 picture, to fill the 16:9
screen, keeping the original image as much as
possible.
Select to return the 4:3 picture to normal
mode.
Select to enlarge the 4:3 picture horizontally
only, to fill the wide screen.
Select to enlarge the 4:3 picture horizontally
and vertically to an equal aspect ratio that fills
the wide screen.
Select to continue using the current screen
mode setting when the channel or input is
changed.
Normal
to return to the default Display Area. Select
Allows you to move the position of the picture
up and down in the window. (Available only in
Wide Zoom and
Press V or v and press
correction between +5 and –5.
Allows you to adjust the vertical size of the
picture. (Available only in
Zoom modes.)
Press V or v and press
correction between +5 and –5.
Using the Settings
–1
Zoom modes.)
to choose a
Wide Zoom and
to choose a
63