Preparation And Transportation Guide - Dantherm CDT 30S MKII Service Manual

Preparation and transportation guide

Introduction This section is a guide to unpacking, preparation, transport and storage
Warning If the machine has been transported lying down, allow it to stand upright for at least 1
hour before use.
Unpacking Follow these steps for unpacking:
Step
1
2
3
4
5
Action
Open the top of the pack-
aging
Position the box vertically,
with the wheels at the bot-
tom
Extract the machine from
the box
Loosen the knobs, pull the
handle up to the desired
height and retighten the
knobs
Remove the protective foil on the control panel
Illustration
Continued on next page
5