Preparation And Transport Guide - Dantherm CDT 30 MK III Service Manual

Preparation and transport guide

Introduction This section is a guide to unpacking, preparation, transport and storage
Warning If the machine has been transported lying down, allow it to stand upright for at least 1
hour before use.
Unpacking Follow these steps for unpacking the CDT 30-40-60:
(CDT 30-40-60)
Step Action
1 Open the top of the pack-
aging
2 Position the box vertically,
with the wheels at the bot-
tom
3 Extract the machine from
the box
4 Loosen the knobs, pull the
handle up to the desired
height and retighten the
knobs
5 Remove the protective foil on the control panel
Illustration
Continued on next page
7