User Guide - Dantherm CDT 30S MKII Service Manual

User guide

Introduction
Switching on/off
and operating status
Operating the heat-
ing element
8
All functions are controlled from the integrated control panel.
The user guide contains the following sections:
Introduction ................................................................................................................ 8
Switching on/off and operating status ......................................................................... 8
Operating the heating element .................................................................................... 8
Internal hygrostat operation ........................................................................................ 9
External hygrostat operation ....................................................................................... 9
Hour counter .............................................................................................................. 9
Display texts ............................................................................................................. 10
Text displays when not connected to mains .............................................................. 10
Replacing the memory battery ................................................................................... 11
Error messages ......................................................................................................... 12
Emptying the water container .................................................................................... 13
The table below shows operation of the on/off function and display texts.
Key
ON – constant
INT HYG ON – operation controlled by internal hygrostat
INT HYG STOP, if internal hygrostat set point is reached
EXT HYG ON – operation controlled by external hygrostat
EXT HYG STOP, if external hygrostat set point is reached
Switch off
The green LED indicates active dehumidification
The integrated 1 kW heating element is activated by setting the
switch behind the water container to setting 1. Switch to O to de-
activate.
Display
Switch behind water container
Continued on next page