Tub Suspension Springs - Electrolux EWX11831 Service Manual

16.4.6 Tub suspension springs

 Left spring
Attach the spring as shown in the figure: the shortest leg towards the
crosspiece, whereas the longest leg towards the welded tub.
 Right spring
The instructions provided for the left spring also apply to the right spring.
When reattaching the springs (after repair work which required their removal), make sure that the bushings shown in
the figure are featured on both ends.
Pay attention to the differences between the bushings (see enlarged details).
Spare bushings are available, under the following codes:
Upper bushing Code 405 50 62-51/9
Lower bushing Code 405 50 62-52/7
Apply some grease on either end of the spring.
Use grease code 5026 24 16-00/6
Attachment position of springs to top crosspiece.
99/106
Technical Support - DMM 599 77 23-65 Rev. 03