Electrolux EWX11831 Service Manual page 14


End of cycle:
End of the programme is indicated by a permanently lit zero
(when the door can be opened).

Appliance stopping with water in the tub, at the end of Programmes
with the RINSE HOLD option, this is displayed by a permanently lit zero.
The LED indicating the door remains on and the LED of the START/PAUSE
button is turned off. The washing machine continues to operate, rotating
the drum once every 2 minutes.

Alarm code:
Indicates an anomaly during operation of the machine. Simultaneously
to the displaying of the code, the START/PAUSE button flashes.

Calculate amount of washing:
Only for appliances with PROPORTIONAL programmes.
After starting the washing programme the dot starts to flash. At this point
the washing machine calculates the amount of washing inside the drum.
When this phase ends the dot lights up fixed and the three digits display
the programme time.

Extra-rinse:
Appliances which do not feature the button and related LED for the Extra
rinse option can enable/disable this option by pressing a key combination
(which may be silk-screen printed on the control panel or described in the
instruction manual). This option is enabled/disabled during programme
selection and is confirmed by the related symbol being turned on/off.
The option remains enabled even after the appliance has been turned off
(for subsequent programmes).
Technical Support - DMM
14/106
599 77 23-65 Rev. 03