13.15 Drum light (where featured)
The drum light consists of a high luminosity LED.
When the appliance is in the selecting phase (START/PAUSE LED flashing), if
the door is opened, the LED lights up and illuminates the inside of the drum.
Vice versa, when the door is closed the LED is turned off.
IMPORTANT: Do not look straight at the light beam emitted by the LED when it is on.
To check the efficiency of the LED, power it with constant direct current of 150 mA and a voltage of 3.3 V.
For the power supply, please refer to the polarities in the figure opposite.
1. Main electronic circuit board
18. Drum light
67/106
Technical Support - DMM
599 77 23-65 Rev. 03