Wildix W-AIR Series User Manual page 23

W-AIR DECT Handset - User Guide
Note: When the alarm starts ringing, press
selected timeout.
To set up snooze timeout: select
Emergency alarms setting (W-AIR LifeSaver / W-AIR Med / W-
AIR Office)
Note: Emergency settings are defined and controlled from the web interface of the base station.
Alarm is sent in the form of an outgoing call to the emergency number preconfigured on the base station's
interface for this extension.
For more information about configuring emergency settings, please refer to W-AIR Network Guides:
Network Admin Guide - Sync over the air
Alarms triggering
Alarm Button: Long-press (3 seconds) the red button on top of the handset
Pull Cord Alarm: Pull a cord from the pull cord hole on the right side of the handset
Running Alarm: Shake up and down the handset for several seconds
Man Down Alarm: Put the handset in the position with an angle over 60 degrees with respect to the
horizontal. The time for the handset to be still before the alarm is triggered can be set on base station web
interface
No Movement Alarm: Do not move the handset. The timeout after which No Movement alarm is triggered
is set on the base station web interface
W-AIR DECT Handset - User Guide
Dismiss to disable it, or
Snooze time and select the timeout.
and W-AIR Network Admin Guide - Sync over LAN
Snooze to repeat the alarm after the
.
W-AIR
Page 23 of 23