Audio Settings - Wildix W-AIR Series User Manual

W-AIR DECT Handset - User Guide
Select Enable Bluetooth
Select Search for devices
Select the device from the list and press Pair
Select Paired devices
Delete a bluetooth headset from the list of paired devices:
Select Paired devices
Select Delete to delete this device or select
Note: The handset can be paired with up to four different bluetooth headsets.
Use Wildix Bluetooth headset WHS-BT:
Accessories .
Third party headsets integrated with Wildix:
Axtel .
Push To Talk (W-AIR 100 (End Of Life) / W-AIR LifeSaver / W-AIR Med / W-AIR Office)
Important: enabling this feature reduces the number of available channels on each base station to 6.
Limitation: The feature does not work over Repeater.
Push to talk (PTT) feature allows transmitting an audio message to other handsets in the network.
Select On to enable the feature
Press and hold the
Your message is transmitted to other handsets over the network (W-AIR 100 / W-AIR LifeSaver / W-AIR Med /
W-AIR Office).

Audio Settings

Audio settings
Go to menu.
Silent mode
When enabled, no sounds are played on the handset.
When enabled, no other audio settings can be changed in the Audio Settings menu.
Ring Volume
Use the Navigation keys to adjust the ring volume.
W-AIR DECT Handset - User Guide
and confirm by pressing
to view the list of available bluetooth headsets
to view the list of devices, select one and press
, select the device that you wish to unpair and press
WHS, WelcomeConsole-EXT, WPEHS - Quick Start Guide - Phones
Wildix Compatible Headsets – Jabra, Plantronics, Sennheiser, JPL,
Mute button and say your message
Yes
Delete all to delete all the paired devices
Connect
More
Page 21 of 23