Wildix W-AIR Series User Manual page 16

W-AIR DECT Handset - User Guide
The caller number and name (in case the contact is present in the phonebook) are displayed on the screen.
Answer a call
Press the green Off-hook
AIR Basic press the
Reject / mute an incoming call
To reject an incoming call, press
To silence an incoming call, press
Place a call
Manually
1. Enter a number
2. Press the green Off-hook
Note: Make sure you enter a prefix if needed when calling the outside line.
Redial
To dial the last called number
Press the green Off-hook
Call a Speed Dial number
It is possible to call a speed dial number, if you have previously assigned at least one Speed Dial number to one
of the contacts.
Make a long press (>2 seconds) from the idle on one of the speed dial keys (from "2" to "9") assigned to a
contact
Call from shared PBX phonebook
Shared company phonebooks must be set up by user via Collaboration or by the PBX administrator.
1. Press Menu key and select
2. Press the Soft key Search
3. Enter the number or the name and press Search key
4. Select a contact that you wish to call (in case a contact has several phone numbers, a green arrow in
displayed near the contact; use Navigation keys to select the phone number)
5. Press the green Off-hook key or
Colleagues are displayed in the list with their actual presence and activity status (synchronised with
Wildix Collaboration): available / offline / do not disturb / away / talking / incoming call.
W-AIR DECT Handset - User Guide
key to answer or press the Speaker Key to respond in the speaker mode (on W-
green Off-hook key twice to answer in Speaker mode).
Reject when receiving an incoming call or press the
Silent when receiving an incoming call
key
key twice from the idle
Central directory
Call soft key
/ press the Soft Key Central Directory
red On-hook Key
Page 16 of 23