Download Print this page
Hide thumbs Also See for W-AIR:

Advertisement

Quick Links

W-AIR HEADSET USER GUIDE - ENGLISH
PACKING LIST
1 x W-AIR Headset
1 x charger
1 x A/C adapter
1 x headband
1 x earbud
!
SAFETY INFORMATION
https://www.wildix.com/safety-information/
TURN ON/ TURN OFF
The headset is automatically turned on when placed into the
charging cradle. To manually turn on the headset, press and hold the
Function key for 4 seconds.
Press and hold the Function key and the two Volume keys
simultaneously for at least 4 seconds to turn off the headset.
FIRST TIME CHARGING
When charging the battery for the first time, it is necessary to leave the
Headset in the charger for at least 10 hours before the battery is fully
charged, and the Headset is ready for use.
HEADSET OVERVIEW
W-AIR Headset User Guide
Color
LED indication
Short blink followed
by long blink
Fast short blink,
repeated
Fast short blink,
repeated
Green
Single short
blink. Notification of
call only via audio in
HS
Single short blink
Long blink
Steady on
Long blink followed
by short blink
Fast, short blink
Red
Steady on
Long blink
Single short blink
repeated slow
Short blink repeated
fast
Blue
Long blink
Single short blink
repeated slow
Purple
Steady on
None
Status
Power Up
Incoming call
2nd incoming call, call
active, Silent mode on
2nd incoming call, call
active,
Silent mode off
In call
Battery charging
Battery charging, full
Power Down
Low battery
Battery charging, low
battery
Registration failed
Idle, out of range
Registration, ongoing
Registration completed
Idle, connected
Menu
Deregistered
Page
1
of
2

Advertisement

loading

Summary of Contents for Wildix W-AIR

  • Page 1 W-AIR HEADSET USER GUIDE - ENGLISH Color LED indication Status PACKING LIST 1 x W-AIR Headset Short blink followed 1 x charger Power Up by long blink 1 x A/C adapter 1 x headband 1 x earbud Fast short blink,...
  • Page 2 2. The Headset is now connecting to the base station. The system administrator can check that the Headset has been From Collaboration: select W-AIR Headset in Device selection list to successfully registered to the base station on the base station place a call using W-AIR Headset.