See the following figure for an illustration of a completed DIN installation
procedure.
3.
Grasp the bottom of the device and slightly rotate it upwards. If there is
resistance, the device is correctly installed. Otherwise, re-attempt the
installation process from the beginning.
2.2.1.2
Removing the DIN Rail Kit
1.
Ensure that power is removed from the device, and disconnect all cables and
connectors from the front panel of the device.
2.
Push down on the top of the DIN rail clip release tab with your finger. As the clip
releases, lift the bottom of the device, as shown in the following illustration.
\
EKI-6333AC-A Series User Manual
Figure 2.6 Correctly Installed DIN Rail Kit
Figure 2.7 Removing the DIN Rail
9