Terminals And Wiring Diagram - Siemens SICAM P30 Manual

5.3

Terminals and Wiring Diagram

Definition of Terminals (viewed from rear to front and from left to right)
1. Upper main terminals
V+
Note
NC means no connection, the same below.
2. Lower main terminals
V1
Note
Main terminals are barrier terminals which can be connected using fork or ring-type lug (no more than 6.5 mm
wide). For cables to be connected to upper and lower main terminals, cold-pressed UT2.5-3 terminal is
recommended before connection. The diagram of connection is below.
Figure 5-2
SICAM P30 P31 P32, 3-phase Current Power Meter, User Manual
E50417-H8940-C561- , Release Date
V- NC NC
V2 V3 VN
Connection Diagram of Main Terminal
R11 R12 R21
I11 I12 I21
Installation and Wiring
5.3 Terminals and Wiring Diagram
R22
I22 I31 I32
25