5.3
Terminals and Wiring Diagram
Definition of Terminals (viewed from rear to front and from left to right)
1. Upper main terminals
V+
Note
NC means no connection, the same below.
2. Lower main terminals
I11
Note
Main terminals are barrier terminals which can be connected using fork or ring-type lug (no more than 6.5 mm
wide). For cables to be connected to upper and lower main terminals, cold-pressed UT2.5-3 terminal is
recommended before connection. The diagram of connection is below.
Figure 5-2
SICAM P20 P21 P22, 3-phase Current Power Meter, User Manual
E50417-H8940-C558-4, Release Date 06.2018
V-
NC
I12
I21
Connection Diagram of Main Terminal
NC
NC
I22
I31
Installation and Wiring
5.3 Terminals and Wiring Diagram
NC
I32
25