Table of Contents
Advertisement
1
Important Safety Information
A. Appliance Certification
Model Santa Fe Pellet Insert (2020)
Laboratory OMNI Test Laboratories, Inc.
Report No. 061-S-77d-6.2
Solid Fuel Room Appliance/Pellet Fuel
Type
Burning Type Insert
ASTM E1509-2004, ULC S628-93
and ULC/ORD-C1482-M1990 Room
Standard
Appliance Pellet Fuel Burning Type and
(UM) 84-HUD, Mobile Home Approved
This pellet insert needs periodic inspection and repair for proper operation. It is against federal regulations to operate this
pellet insert in a manner inconsistent with operating instructions in this manual.
NOTE: This installation must conform with local codes. In the absence of local codes you must comply with the ASTM
E1509-2004, ULC S628-93, ULC/ORD-C-1482-M1990, (UM) 84-HUD.
July 10, 2019
B. BTU & Efficiency Specifications
Emissions Report #: 0061PM077E
EPA Certified Emissions: 1.1 grams per hour
*LHV Tested Efficiency: 70.4%
**HHV Tested Efficiency: 66.1%
***EPA BTU Output: 5,800 to 22,400 / hr
*Weighted average LHV (Low Heating Value) efficiency
using data collected during EPA emissions test .
**Weighted average HHV (High Heating Value) efficiency
using data collected during EPA emissions test .
***A range of BTU outputs based on EPA default
efficiency and the burn rates from the low and high
EPA tests.
****Based on the maximum feed rate per hour multiplied
by approximately 8600 BTU's which is the average BTU's
from a pound of pellets .
‡ Grade of pellet fuel as certified by Pellet Fuels Institute (PFI), ENPlus
or CANplus.
The Santa Fe insert
is Certified to comply
with 2020 particulate
emission standards.
7019-801C
SANTA FE PELLET INSERT
EPA Certification #: 175-19
****BTU Input: 9,300 to 30,600 / hr
Vent Size: 3, 4 "L" or "PL", or 6 inches
Hopper Capacity: 45 lbs.
Fuel Premium Wood Pellets
3
Advertisement
Table of Contents
