Table of Contents
Advertisement
Figure 20 Radix Point
Radix Point
→
Radix Point
The radix point can be changed to display a comma or a decimal in
numeric displays (e.g. 1.00 becomes 1,000 when Comma is selected)
(Figure
20).
Backlight
→
Backlight
In Automatic mode, the instrument display will dim 60 seconds after the
last key was pushed. Once any key is pushed, the instrument display will
return to the user-defined brightness setting and the keypad backlight
will turn on. The screen will dim and the keypad backlight will turn off
after another 60 seconds of inactivity.
In manual mode, the instrument display remains at the user-defined
brightness until manually changed and the keypad backlight is turned on
and off by the Backlight key.
NOTE: In bright conditions, set the backlight to Manual mode.
Software (Sw) Version
→
Sw Version
Sw Version shows the ProDSS software version number. The latest
instrument software and update instructions are available at ysi.com.
Instrument software can be updated through the KorDSS PC software
program when connected to the internet or if the update file has been
transferred to the PC. See the KorDSS help section for more information.
Serial #
→
Serial #
Serial # shows the serial number of the ProDSS handheld instrument.
Note the serial number when contacting YSI support.
Operation
21
Advertisement
Table of Contents
