Table of Contents
Advertisement
Operation
Startup
Push the
key to turn on the handheld. If the handheld does not turn on, make sure that the battery pack is correctly
installed and charged. Push and hold the
Navigation
The ProDSS contains menus to change user-defined options, functions, and parameters. Use the arrow keys
(
and
) to highlight different options within menus and sub-menus, then push the
Push the
key to return to the previous menu.
NOTE: When in an alpha/numeric screen, the
return to the previous menu.
Push the
key to return to the Run screen. To enable or disable an option, highlight the option, then push the
Esc
key. Enabled functions appear as a circle with a dot
circle only
or an empty box
Alpha/Numeric Entry
When required, an alpha or alpha/numeric entry screen will be shown. When finished entering information, highlight
ENTER, then push the
NOTE: When in an alpha/numeric screen, the
return to the previous menu.
2
4
1 User entry field
2 Delete entire entry
3 Backspace
14
key for 1.5 seconds to turn the handheld off.
.
ENTER
key to save the entry (Figure 8).
1
Figure 8 Alpha/numeric and numeric entry screens
key is for alpha/numeric navigation only. Push the
or a box with a check mark
key is for alpha/numeric navigation only. Push the
5
3
4 Enter selection
5 Upper/lowercase
ENTER
key to select the option.
key to
Esc
. Disabled functions appear as a
Esc
1
2
3
4
ENTER
key to
Advertisement
Table of Contents
