Subscribe to Our Youtube Channel
Related Manuals for netvox R727
Summary of Contents for netvox R727
-
Page 1: User Manual
R727 Model： Outdoor Multifunction Environment Sensor Outdoor Multifunction Environment Sensor User Manual Firmware:V1.0 Hardware:V0.3... -
Page 2: Table Of Contents
Table of Content 1. Introduction................................2 2. Appearance................................. 3 3. Main Features................................4 4.Set up Instruction.................................4 4.1 Join Into Lora Network............................ 4 4.2 Function Key..............................4 4.3 Data Report...............................4 5. Restore to Factory Setting............................5 6. Installation.................................. 6 7. Important Maintenance Instruction..........................7... -
Page 3: Introduction
R727 is a ClassA type device based on LoRaWAN open protocol, compatible with LoRaWAN protocol. R727 carries RA07 which can connect a variety of sensor, plus multi-layer mask, bracket, DC power supply for outdoor use. A variety of sensor combinations are required for specific requirements. A variety of sensor combinations are required for specific requirements. -
Page 4: Appearance
2. Appearance R727 Appearance R727 Sensor Body Inside the Mask... -
Page 5: Main Features
4.Set up Instruction 4.1 Join Into Lora Network The R727 is powered by 12V DC and can communicate with the gateway. Users will firstly add R727 to the gateway's network. Operations to join the network: (1) After the device is powered on, the device which never be joined into the network will automatically scan a new network to join. -
Page 6: Restore To Factory Setting
The R727 device also supports the Cayenne TxPeriod cycle configuration command. Therefore, the R727 can also perform the report according to the cycle time of the TxPeriod value. At a specific time, the report period is ReportMaxTime or TxPeriod, depending on which cycle time is last configured. -
Page 7: Installation
U-shaped screw through the appropriate size cylinder on the fixed post piece of R727. Fit the shim nut and lock nut in order till R727 device body is not stable shaken. (2) Loosen the M5 nut on the bottom of the R727 device cover and remove the cover together with... -
Page 8: Important Maintenance Instruction
(3) Insert the DC plug of the power supply from the center hole of the bottom cover of the R727, insert it into the position of the A07 socket, and return the shutter screw to its original position to lock the N5 nut.
Need help?
Do you have a question about the R727 and is the answer not in the manual?
Questions and answers