Declaration Of Conformity - Siemens FLENDER B3 E Series Assembly And Operating Instructions Manual

12.2

Declaration of conformity

within the meaning of EC Directive 94/9/EC of 23.03.1994 and the legal requirements laid down for its
implementation
The manufacturer, Siemens AG, D ­ 46393 Bocholt, declares that the equipment described in these assembly
and operating instructions:
is in conformity with Article 1 and Article 8, Paragraph 1 b) ii) or 1 c) of Directive 94/9/EC and complies with the
requirements of Directive 94/9/EC and the following standards:
DIN EN 1127 1 : 02 2008
DIN EN 13463 1 : 07 2009
DIN EN 13463 5 : 03 2004
DIN EN 13463 6 : 07 2005
DIN EN 13463 8 : 01 2004
DIN EN 60079-0 : 05 2007
The technical documentation has been delivered to the body named below:
DEKRA EXAM GmbH, D ­ 44727 Bochum, code number: 0158.
Voerde, 2011 03 31
Voerde, 2011 03 31
Declaration of conformity
Belt conveyor gear unit
B..H, B..M, B3.E;
T3.H, T3.M
Sizes 4 to 28
Dr. Nico van de Sandt
(Head of Engineering DAE)
Dr. Bernhard Hoffmann
(Vice President Business Subsegment DA)
BA 5033 EN 03/2011
95 / 96