Storing The Gear Unit - Siemens FLENDER B3 E Series Assembly And Operating Instructions Manual

Fig. 7: Attachment points on gear units type B... / T3.. with gear­unit swing base
For a detailed illustration of the gear unit and the position of the attachment points, please refer
to the drawings of the order­specific gear­unit documentation.
4.3

Storing the gear unit

The gear unit must be stored in the position of use in a sheltered place; it must be placed on a vibration­free,
dry base and covered over.
When temporarily storing the gear unit and any single components supplied with it,
the preservative agent should be left on them. It must not be damaged, otherwise there
is a risk of corrosion.
Do not stack gear units on top of one another.
If the gear unit is being stored out of doors, it must be particularly carefully covered,
and care must be taken that neither moisture nor foreign material can collect on the
unit. Waterlogging should be avoided.
Unless otherwise agreed by contract, the gear unit must not be exposed to harmful
environmental factors such as chemically aggressive products.
Provision for special environmental conditions during transport (e.g. transport by ship) and
storage (climate, termites, etc.) must be contractually agreed.
BA 5033 EN 03/2011
20 / 96