Siemens FLENDER B3 E Series Assembly And Operating Instructions Manual page 59

6
5
4
7
Fig. 48: Hollow shaft with internal spline, demounting with hydraulic lifting equipment ("Lukas")
1 Machine shaft
2 Hollow shaft
3 DU bush
4 Hydraulic lifting unit ("Lukas")
5
6
4
Fig. 49: Hollow shaft with internal spline, demounting with end plate
1 Machine shaft
2 Hollow shaft
3 DU bush
Avoid canting when pulling the unit off.
The plate for forcing­out is not included in our delivery.
If the support is provided not only by the hollow shaft, but also by the housing, as
shown in fig. 48, the forces used must not exceed the values given in the following
table 12.
5 Threaded spindle
6 Pressure­oil connection
7 Plate for forcing out
4 End plate
5 Pressure­oil connection
6 Forcing screws
BA 5033 EN 03/2011
59 / 96
3
1
2
3
1
2