Fig. 3:
Attachment points on gear units type B... / T3..
Fig. 4:
Attachment points on gear units type B3.E
For drive units where addon parts such as motor, addon coupling etc. are mounted on the gear unit an
additional attachment point may be required because of the shift in the centre of gravity.
Units which are slung by eyebolts must not be tilted.
Fig. 5:
Attachment points on gear units type B..H / T3.E with auxiliary drive
Fig. 6:
Attachment points on gear units type B... / T3.. with motor
BA 5033 EN 03/2011
19 / 96