Storing The Gear Unit - Siemens FLENDER H SH Series Assembly And Operating Instructions Manual

Fig. 7: Attachment points on gear units types B... with gear­unit swing base
Fig. 8: Attachment points on gear units types B..H with auxiliary drive
A detailed view of the gear unit can be obtained from the drawings in the gear­unit documentation.
4.3

Storing the gear unit

The gear unit must be stored in a sheltered place in the position of the original packaging or in the position
of use, placed on a vibration­free, dry base, and covered over.
When temporarily storing the gear unit and any single components supplied with it,
the preservative agent should be left on them. It must not be damaged, otherwise there
is a risk of corrosion.
Do not stack gear units on top of one another.
If the gear unit is being stored out of doors, it must be particularly carefully covered,
and care must be taken that neither moisture nor foreign material can collect on the
unit. Waterlogging should be avoided.
Unless otherwise agreed by contract, the gear unit must not be exposed to harmful
environmental factors such as chemically aggressive products.
Provision for special environmental conditions during transport (e.g. transport by ship) and
storage (climate, termites, etc.) must be contractually agreed.
BA 5030 en 02/2013
23 / 96