Philips 170X7FB/00 Service Manual page 20

20 190X7&170X7 LCD
Go to cover page
8 OSD MAIN CONTROLS
UNLOCKED
9 THIS IS 85HZ
OVERSCAN, CHANGE
COMPUTER DISPLAY
INPUT TO
1280X1024@60HZ
10 the window of
" MONITOR SETUP
11 the window of
"
BRIGHTNESS
12 SELECTED INPUT NOT
"
AVAILABLE
13 SECURITY
PROTECTED, THIS
MONITOR IS GOING
TO ENTER POWER
SAVING MODE IN 15
SECONDS
14 SECURITY
PROTECTED, THIS
MONITOR IS GOING
TO ENTER POWER
SAVING MODE IN 15
SECONDS
15 the window of
" "
VOLUME
Warning Message
3 secs This message will appear 3
seconds to indicate the OSD
MAIN CONTROLS status when
to un-lock it by pressing
"
MENU(OK) button for more
than 10 seconds while there is
video input from
PC
10 mins This message will appear 5
seconds in every 60 seconds for
10 minutes when the input of PC
video timing is at 85Hz mode.
Remark: AUTO is still functional
in this mode
60 secs This message will appear when
" the OK button is pressed.
60 secs This message will appear when
"
the BRIGHTNESS button is
pressed.
3 secs When just one input (analog or
digital), press input switch or
"
hot key, then after show this
warning message 3 sec, return
to original input.
15 secs This warning appears when the
security was set ON and
someone takes out from the
client PC
1 mins This warning appears when
Asset management Server
sends power saving command
to client PC
60 secs This message will appear when
the VOLUME button is pressed.
"
" "
" "