Philips 170X7FB/00 Service Manual page 44

44
190X7&170X7 LCD
Go to cover page Go to cover page
5 Check the firmware version
1). Turn off monitor.
2). [Push "AUTO" & "OK" buttons at the same time and hold them]
+[Press "power" button untill comes out "Windows screen" ]
=> then release all buttons.
3).Press "MENU" button, wait until the OSD menu come on the
Screen of the monitor.You will find, after upgrade, the version
have already changed from The former"HUDSON 170X7 V010
2006/08/02" to the Present "HUDSON 170X7 V022
2006/09/18" as shown in Fig. 13 and Fig. 14.
Factory Mode indicator
Factory Mode indicator
4) Turn off the monitor, exit the factory mode.
Firmware Upgrade for CPU
Fig. 13
Fig. 14