Mounting The Tt1 Tonearm On The Statement Turntable - Clearaudio Statement TT1 User Manual

User manual
5. Mounting the
Place the tonearm chassis on top of the two mounting bases. Lift it carefully, making sure that the
sliding tonearm bridge is positioned to the rear of both sliding bases as shown in picture 9.
While holding it in place, insert the four socket head cap screws provided into the threaded holes in
the tonearm mounting bases and tighten them.
Please note: Always hold the tonearm in place while fixing the four bolts.
Pic. 9: Placing the tonearm assembly in position
Pic. 10: Tightening the tonearm mounting bolts
Made in Germany
TT1
tonearm on the
Statement
turntable
9