Mounting Procedure - Clearaudio concept V2 User Manual

User manual / Bedienungsanleitung

2. Mounting procedure

Take the cartridge out of the packaging. To avoid any damage, we
recommend leaving the stylus guard on the cartridge while mounting
the cartridge onto the tonearm.
Use the screws provided to mount your Clearaudio MM cartridge
(the cartridge threads in the body comply with the metric standard
for M 2.5mm screws and have the standard spacing of 12.7mm).
Be careful not to over-tighten the screws as they may strip
the threaded holes.
Now connect the pins of your Clearaudio cartridge to the jacks of
the headshell or tonearm cable, taking care not to use too much
force. If necessary, you can use suitable precision pliers or tweezers
for assistance.
Please note the colour coding below in order to ensure the correct
phase in music playback, otherwise an audible sound deterioration
would result.
+
R
L
-
Pic. 1: Color marking of the signal pins
Made in Germany
Left output (L+)
Left output (L-)
Right output (R+)
Right output (R-)
>>
>>
>>
>>
Page / Seite 7
white
blue
red
green