Mounting The Profiler Tonearm Without Vta-Lifter - Clearaudio Profiler User Manual

User manual / Bedienungsanleitung
3. Mounting the
Pic. 8: Mounting the clamping ring
Pic. 9: Mounting the tonearm
Page / Seite 10
Profiler
tonearm without VTA-Lifter
Take the clamping ring and place it on the recess
in the tonearm base.
Now you can attach the clamping ring to the
tonearm base with the 3 supplied M4 x 10
screws.
Make sure that the side hole of the clamping
ring (see Pic. 9) remains accessible.
Insert the tonearm cable first and then the
tonearm foot of the
hole of the clamping ring.
Now fix the tonearm with the screws and
the hex wrench. Do not over-tighten for later
adjustments.
Profiler
To assemble the
please follow the separate user manual for the
VTA-Lifter.
© clearaudio electronic GmbH, 2022-11
Profiler
tonearm into the
tonearm with VTA-Lifter,