Fogging Of Optical Surfaces; Recommended Surface Disinfectants; Hygiene Plan - Atmos i View 21 COLPO Operating Instructions Manual

5.0 Cleaning and care
5.3.3

Fogging of optical surfaces

To prevent the eyepiece optics from fogging, we recommend using an anti-fogging agent.
Note:
Anti-fogging agents provided by eyecare professionals for use with eyeglass lenses are also suitable for ATMOS optics.
• Please observe the instructions supplied with each anti-fogging agent.
Anti-fogging agents do not only ensure fog-free optics they also clean and protect them against dirt, grease, dust, fluff and
fingerprints.

5.4 Recommended surface disinfectants

When using disinfectants containing aldehyde and amine at the same object colour changes may occur.
• Do not use
- Disinfectants which contain organic or inorganic acids or bases as they could cause corrosion damage.
- Disinfectants which contain chloramines or phenol derivatives as they could cause stress cracks in the material which is used
for the housing.
Disinfectant
Green & Clean SK
Bacillol 30 Foam
®
Kohrsolin FF
®
(Application concentrate)
Kohrsolin extra
®
(Application concentrate)
Mikrobac forte
®
(Application concentrate)
Mikrozid Sensitive Wipes
®
SaniCloth Active
®

5.5 Hygiene Plan

WHAT
C
Housing X
Lens / Optics X
Operation parts* X
Protective covers
(disposables)
Hand grips X
C= Cleaning, D= Disinfection, S= Sterilization
* Operation parts
Knobs to adjust (colour filter, 5 fold magnification changer, operator panel, adjusting screws on the arm)
Microscope Handle
x
x
x
x
HOW WHEN
D S
X X
X X
X X
X
X X
Suitable for
Control unit
x
x
x
Manual wiping and disinfection
Manual wiping and disinfection
Manual wiping and disinfection
Single-use product -> not for reprocessing, change after use
Manual wiping and disinfection
Other mechanical Optical surfaces
surface treatment
x
x
x
x
x
x
x
Details
x
x
23