Next steps
1
Install the battery.
2
Install the
base
cover.
3
Install the
SD
card.
4
Follow the procedures in
M2. SATA Solid State Drive (SSD)
Removing the M.2 2280 solid state drive
Prerequisite
1
Follow the procedure in
2
Remove the
SD
card.
3
Remove the
base
cover.
4
Remove the
battery
Steps
1
Loosen the captive screws that secure the SSD thermal plate and solid-state drive to the palm rest and keyboard assembly [1].
2
Remove the single (M2x3) screw that secures the SSD to the system [2].
3
Lift the SSD thermal plate from its connector and lift it off the system [3].
4
Pull the SSD thermal plate from its connector on the system board. [4]
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
25