Installing the hard drive assembly
Steps
1
Align the screw holes on the hard drive assembly with the screw holes on the palm rest and keyboard assembly [1].
2
Replace the four screws (M2x3) that secure the hard drive assembly to the palm rest and keyboard assembly [2].
3
Connect the hard drive cable to the system board and close the latch to secure the cable [3].
Next steps
1
Install the battery.
2
Install the
base
cover.
3
Install the
SD
card.
4
Follow the procedures in
Hard drive
Removing the hard drive
Prerequisite
1
Follow the procedure in
2
Remove the
SD
card.
3
Remove the
base
cover.
4
Remove the
battery
5
Remove the
hard drive assembly
38
Removing and installing components
After working inside your
Before working inside your
computer.
computer.