Table of Contents
Advertisement
3
Remove the
base
cover.
4
Remove the
battery
Steps
1
Remove the M2x3 screw that secures the WLAN bracket to the system [1].
2
Lift the WLAN bracket from the system [2].
3
Disconnect the WLAN antenna cables from the connectors on the WLAN card [3].
4
Pull the WLAN card from the connector on the system board [4].
Installing the WLAN card
About this task
CAUTION:
To avoid damage to the WLAN card, do not place any cables under it.
Steps
1
Insert the WLAN card into the connector on the system board [1].
2
Connect the WLAN cables to the connectors on the WLAN card [2].
3
Place the WLAN card bracket to secure the WLAN cables [3].
4
Replace the M2x3 screw to secure the WLAN bracket to the WLAN card [4].
Removing and installing components
41
Advertisement
Table of Contents
