Touchpad
Removing the touchpad
Prerequisite
1
Follow the procedure in
2
Remove the
SD
card.
3
Remove the
base
cover.
4
Remove the
battery
Steps
1
Open the latch and disconnect the hard-drive cable from the system board [1].
2
Open the latch and disconnect the touchpad cable from the system board [2].
3
Gently peel the tape that secures the touchpad to the palm rest and keyboard assembly [3].
4
Remove the two screws (M2x2) that secure the touchpad bracket to the system [1].
5
Lift the touchpad bracket off the system [2]
Before working inside your
computer.
Removing and installing components
33