Installing the SD card
Step
Slide the Secure Digital into the slot until it clicks into place.
Next step
1
Follow the procedure in
Base cover
Removing the base cover
Prerequisites
1
Follow the procedure in
2
Remove the
SD
card.
Steps
1
Loosen the three captive screws that secure the base cover to the system [1].
2
Remove the six (M2.5x7) screws that secure the base cover to the system [2].
3
Remove the screw (M2x4) that secure the base cover to the system [3].
18
Removing and installing components
after working inside your
computer.
Before working inside your
computer.