Table of Contents
Advertisement
Removing and installing components
This section provides detailed information on how to remove or install the components from your
computer.
Removing the Secure Digital (SD) card
1.
Follow the procedure in
2.
Press in on the SD card to release it from the computer. Slide the SD card out of the computer.
Installing the SD card
1.
Push in the SD card into its slot until it clicks into place.
2.
Follow the procedure in
Removing the battery cover
1.
Follow the procedure in
2.
Perform the following steps as shown in the illustration:
a. Slide the release latch to unlock the battery cover [1].
b. Slide and lift the battery cover to remove it from the computer [2].
Before working inside your
After working inside your computer
Before working inside your
computer.
computer.
2
9
Advertisement
Table of Contents
