Nibe SMO 40 User Manual page 49

SCHEDULING
Menu
2.3
Two different periods of hot water com-
fort per day can be scheduled here.
Scheduling is activated/deactivated by
ticking/unticking"activated". Set times are
not affected at deactivation.
Schedule: The schedule to be changed is
selected here.
Activated: Scheduling for the selected
period is activated here. Set times are not
affected at deactivation.
Day: Select which day or days of the
week the scheduling is to apply to here. To remove the scheduling for a particular
day, the time for that day must be reset by setting the start time to the same
as the stop time. If the row "all" is used, all days in the period are set according
to that row.
Time period: The start and stop time for the selected day for scheduling are se-
lected here.
Adjustment: Set the hot water comfort that is to apply during scheduling here.
Conflict: If two settings conflict with each other, a red exclamation mark is dis-
played.
NIBE SMO 40
TIP
If you wish to set similar scheduling for every day of the week start
by filling in "all" and then changing the desired days.
TIP
Set the stop time earlier than the start time so that the period extends
beyond midnight. Scheduling then stops at the set stop time the day
after.
Scheduling always starts on the date that the start time is set for.
Activated
SCHEDULING HOT WATER
schedule 1 schedule 2
activated
all
mon
tues
wed
thur
fri
sat
sun
Day Time period
Chapter 3 | SMO 40 – at your service
Schedule
2.3
normal
Adjusting Conflict
49