Curve; Heating Curve; Cooling Curve - Nibe SMO 40 User Manual

CURVE

Menu
1.9.1

heating curve

Setting range: 0 – 15
Default value: 9
cooling curve (accessory
required)
Setting range: 0 – 9
Default value: 0
The prescribed heating curve for your house can be viewed in the menu
curve . The task of the heating curve is to give an even indoor temperature, re-
gardless of the outdoor temperature, and thereby energy efficient operation. It
is from this heating curve that the control module's control computer determines
the temperature of the water to the heating system, supply temperature, and
therefore the indoor temperature. Select the heating curve and read off how the
supply temperature changes at different outdoor temperatures here. If there is
access to cooling the same settings can be made for the cooling curve.
NIBE SMO 40
system
flow temperature °C
system
flow temperature °C
Chapter 3 | SMO 40 – at your service
heating curve 1.9.1.1
outdoor temp. °C

cooling curve 1.9.1.2

outdoor temp. °C
heating
33