Nibe SMO 40 User Manual page 12

Display
A
Instructions, settings and operational information are shown on the
display. You can easily navigate between the different menus and
options to set the comfort or obtain the information you require.
Status lamp
B
The status lamp indicates the status of the control module. It:
• lights green during normal operation.
• lights yellow in emergency mode.
• lights red in the event of a deployed alarm.
OK button
C
The OK button is used to:
• confirm selections of sub menus/options/set values/page in the start
Back button
D
The back button is used to:
• go back to the previous menu.
• change a setting that has not been confirmed.
Control knob
E
The control knob can be turned to the right or left. You can:
• scroll in menus and between options.
• increase and decrease the values.
• change page in multiple page instructions (for example help text
Switch
F
The switch assumes three positions:
• On ( )
• Standby ( )
• Emergency mode (
The emergency mode must only be used in the event of a fault in the
control module. In this mode, the compressor in the heat pump
switches off and any immersion heater engages. The control module
display is not lit and the status lamp shines yellow.
12 Chapter 2 | The control module – the heart of the house
guide.
and service info).
)
NIBE SMO 40