Cooling - Nibe SMO 40 User Manual

COOLING (HEAT PUMP WITH COOLING FUNCTION
Menu
REQUIRED)
1.3.2
Here you can schedule when cooling is permitted in the accommodation for up
to two different time periods per day.
schedule 1
all
mon
tues
wed
thur
fri
sat
sun
Day
NIBE SMO 40
TIP
If you wish to set similar scheduling for every day of the week start
by filling in "all" and then changing the desired days.
TIP
Set the stop time earlier than the start time so that the period extends
beyond midnight. Scheduling then stops at the set stop time the day
after.
Scheduling always starts on the date that the start time is set for.
Caution
Changes of temperature in accommodation take time. For example,
short time periods in combination with underfloor heating will not give
a noticeable difference in room temperature.
Activated
SCHEDULING COOLING
schedule 2
activated
21:30 - 06:00
Time period Adjusting
Schedule
1.3.2
on
Conflict
Chapter 3 | SMO 40 – at your service 29