Use And Maintain The Illuminator; Charge The Illuminator - Welch Allyn KleenSpec 800 Series Directions For Use Manual

Use and maintain the illuminator

Charge the illuminator

Charge the illuminator before using it the first time.
4-5 hr
1. Connect the charging base to AC power.
2. Place the illuminator (either direction) into the charging station.
3. Remove the charged illuminator when you are ready to use it.
Full charging takes 4 to 5 hours.
Note
The charging base has the following status indicators.
Status
Off
Green
Amber
It is safe to leave the illuminator in the charging station after it is charged.
Description
No AC power
AC power / Full charge
Illuminator inserted into charging base and is charging
5