Table of Contents
Advertisement
NOTICE
Destruction of the motor
If you fix the rotor and/or stator at both ends, this can result in significant material
deformation in the machine assembly due to thermal expansion, which could destroy the
motor.
• Only fix the stator and rotor at one end.
Electric shock caused by defective cables
Defective connecting cables can cause an electric shock and/or material damage, e.g. by
fire.
• When installing the motor, make sure that the connection cables
• Note the permissible bending radii according to Chapter "Important data for 1FW6
• Do not hold a motor by its cables.
• Do not pull the motor cables.
Naturally cooled 1FW6 built-in torque motors
Operating Instructions, 07/2017, 6SN1197-0AF02-0BP2
WARNING
– are not damaged
– are not under tension
– cannot come into contact with any rotating parts
cables".
4.1 Safety instructions relating to mechanical mounting
Mechanical installation
55
Advertisement
Table of Contents
