Table of Contents
Advertisement
Introduction
These operating instructions describe the motor and explain how to handle the motor from
the delivery to the disposal stage.
● Before you start using the motor, you must read these operating instructions to ensure
safe, problem-free operation and to maximize the service life.
These operating instructions complement the relevant SIEMENS Configuration Manual.
Siemens strives continually to improve the quality of information provided in these operating
instructions.
● If you find any mistakes or would like to offer suggestions about how this document could
be improved, contact the Siemens Service Center.
● Always follow the safety instructions and notices in these operating instructions.
The warning notice system is explained on the rear of the inside front.
Text features
In addition to the notes that you must observe for your own personal safety as well as to
avoid material damage, in these operating instructions you will find the following text
features:
Operating instructions
Operating instructions with the specified sequence are designated using the following
symbols:
The arrow indicates the start of the operating instructions.
The individual handling steps are numbered.
1. Execute the operating instructions in the specified sequence.
The square indicates the end of the operating instruction.
Operating instructions without a specified sequence are identified using a bullet point:
● Execute the operating instructions.
Enumerations
● Enumerations are identified by a bullet point without any additional symbols.
– Enumerations at the second level are hyphenated.
Naturally cooled 1FW6 built-in torque motors
Operating Instructions, 07/2017, 6SN1197-0AF02-0BP2
5
Advertisement
Table of Contents
