Aaeon PFM-C20N Manual page 39

C AN B u s M o d u l e
Command "grep" to check if the driver setting is the same or not.
(you may skip this step)
[root@localhost Fedora5]# grep . /proc/sys/Can/*
Step 6: Start testing the transmission, you have to create a new
terminal (File Open Terminal) on the existing terminal. And then,
command "receive" in one of the terminals to monitor CANBUS and
receive data.
[root@localhost Fedora5]# ./receive
Chapter 3 Driver Installation
3 - 14
P F M - C 2 0 N