Phone Line Test; False Alarm Monitoring And Reporting (Option - Special Order); Remote Simulation Of Emergency Call; Remote Call To Verify Phone Operation On A Regular Basis - EmerCom Technologies EMC-60 User Manual

EMC-60 User Guide

4.3 Phone Line test

A phone line test feature enables on-site personnel who have access to the phone
keypad to go off hook, listen for dial tone, call any number and engage the speaker and
microphone for volume adjustment, converting the EC emergency phone into a regular
hands-free telephone.
4.4 False Alarm monitoring and reporting (option – special order)
In addition the EC-Phone can monitor whether the elevator door curtain has detected
motion since the phone button was last pressed (door contact required), informing the
emergency response phone operator that there is no longer an entrapment and
assistance is probably no longer required.

4.5 Remote simulation of emergency call

The phone can be programmed remotely to the extent of initiating a test simulation of an
"emergency" call (password protected).

4.6 Remote Call to verify phone operation on a regular basis:

The remote call feature is a means for building owners to perform daily end-to-end
diagnostic calls. The phone can automatically call a programmed phone number to
verify phone operation on a regular basis. During these calls the digital emergency
phone checks for phone line issues then updates and reports the alarm status.

4.7 Setting for quiet (low-power) or noisy (static) phone lines:

The voice detection threshold can be adjusted to cater for the selection of "unregulated"
phone lines becoming available (e.g. PSTN phones connected to optical fibre/VoIP
systems).
- 10 -