EmerCom Technologies EMC-60 User Manual page 30

EMC-60 User Guide
This equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subject to state tariffs. Contact your state public utilities
commission, public service commission or corporation commission for information.
This equipment does not provide for data operation.
JACK (USOC): hardwired
RINGER EQUIVALENCE = 0.7 Class B
Facility Interface Code (FIC) = 02LS2
Service Order Code (SOC) = 9.0y
Caution - This equipment cannot report an alarm when other equipment (telephone,
answering system, fax, etc.) connected to the same phone line is in use. If the phone
line is shared with other users, ensure the priority of the emergency call is maintained. If
in doubt please contact us at 1-604-589-3899.
Caution - To ensure proper operation, this equipment must be installed according to the
enclosed installation instructions. To verify that the equipment is operating properly and
can successfully report an alarm, this equipment must be tested immediately after
installation, and periodically thereafter, according to the enclosed test instructions.
WHEN PROGRAMMING EMERGENCY NUMBERS AND/OR MAKING TEST CALLS
TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain to the dispatcher the reason for the call.
2) Perform such activities in off-peak hours.
- 30 -